Hornby controllers come in various versions. If you intend to use electric point motors or lit signals etc, please ensure you have a unit with an AC accessory output. Contact us if unsure.
For a basic train controller, we recommend the Bachmann 36-560 unit which is very reliable and a good replacement for any faulty controller you may have on a standard train set.
Note: Our price is discounted substantially from Hornby list price - it is considerably cheaper to purchase these items from us than direct from Hornby. Items shown are stock items and available in reasonable quantities.
-
Typically used for Point Motors
This switch is off at both ends but gives a momentary pulse of power as you pass the switch between the poles. [...]
-
Typically used for Point Motors
This switch is off at both ends but gives a momentary pulse of power as you pass the switch between the poles. [...]
-
Typically used for Light Signals
-
Typically used for Light Signals
-
Typically used for isolators
-
Typically used for isolators
-
Fits into any piece of track.
There is a small gap in the sleepers of all Hornby and Bachmann track, into which this pushes and makes a tight [...]
-
Fits into any piece of track.
There is a small gap in the sleepers of all Hornby and Bachmann track, into which this pushes and makes a tight [...]
-
As an alternative to the R8250 Controller, the Analogue Train and Accessory Controller features an improved, heavier casing, as well as an additional [...]
-
As an alternative to the R8250 Controller, the Analogue Train and Accessory Controller features an improved, heavier casing, as well as an additional [...]
-
This unit allows you to control your train using your smart phone.
It requires a separately listed power supply - part number P9100. It won't [...]
-
This unit allows you to control your train using your smart phone.
It requires a separately listed power supply - part number P9100. It won't [...]
-
This is limited brand new stock at a special price.
This heavy duty unit is the top of the Hornby Analogue range, the Hammant and Morgan HM20
-
This is limited brand new stock at a special price.
This heavy duty unit is the top of the Hornby Analogue range, the Hammant and Morgan HM20
-
Fits below the point or use a R8015 adaptor to house on the surface.
This is the traditional point motor - see also R8243 for the style that clips [...]
-
Fits below the point or use a R8015 adaptor to house on the surface.
This is the traditional point motor - see also R8243 for the style that clips [...]
-
Little shed to hide your R8014 point motors.
-
Little shed to hide your R8014 point motors.
-
Contains 2 x R602 and wires to link them together
This allows you to make two or more loops or sections of track live from one controller.
-
Contains 2 x R602 and wires to link them together
This allows you to make two or more loops or sections of track live from one controller.
-
Special low resistance version.
-
Special low resistance version.
-
Fits on the surface without an adaptor.
Designed to be positioned either side of any Hornby point, this surface mounted point motor allows for the [...]
-
Fits on the surface without an adaptor.
Designed to be positioned either side of any Hornby point, this surface mounted point motor allows for the [...]
