This R/C kit recreates a Tamiya popular 1980’s R/C comic car famously known as the Saint Dragon. The limited-edition recreation is mounted on the same chassis as the Fire Dragon, which is a capable 4WD off-road machine!
 
Efficient Shaft-Driven 4WD
The Saint Dragon (2021) chassis features a shaft-driven 4WD drivetrain married to a lightweight and tough bathtub frame that employs front and rear gearboxes with the suspension attached to them; that suspension utilizes upper "I" and lower "H" arms, and offers a ground-hugging fun drive experience. Both gearboxes house a gear differential, and are compact to ensure plentiful ground clearance. The kit also features an aluminum motor mount for superior heat dissipation.
 
- R/C assembly kit. Length: 390mm, width: 240mm, height: 135mm.
- Saint Dragon body is pre-assembled and pre-painted in white, all that is required to finish the body is the application of stickers.
- Based on the same 4WD buggy chassis as Item 47457, which uses a tough bathtub frame plus front/rear gearboxes with suspension attached.
- 4-wheel double wishbone suspension uses CVA oil shock/dampers, and a front stabilizer for a firm setup.
- Front and rear sealed differentials use die-cast, 3-bevel type gears for superior handling feel.
- Features an aluminum motor mount.
- Includes 540-type brushed motor.
- Requires: 2-channel radio, steering servo, ESC (electronic speed controller), and 7.2 volt battery with compatible charger.

Pricing Note: We have priced this kit above, as we do the whole range, assuming that you will not require the standard ESC unit.  If you would like the kit with the ESC included, simply add the Carson Dragster or Tamiya Hobbywing ESC from the drop down below - which adds £15-£18 to the total.  Note also, Tamiya kits do not come shrink wrapped in the UK or Japan. The box sticker may state "ESC Included" whether you order it with or without this unit.
 
Options Explained
 
Bearing Upgrade: These make the car run more smoothly and are easily installed during assembly. If there is no option for these shown, then the kit already includes the bearing upgrade as standard. These are entirely optional.

Radio System: There is a choice of a TWIN STICK (Traditional) radio or a Steering Wheel (Modern) radios. All operate on 2.4Ghz and use the new Crystal-Free technology, so you can run multiple cars at the same time without any interference. All radios chosen from this page will include a steering servo as these are not included in the kit itself.

ESC: This is the connection between the radio system and the motor. You have several choices. The standard Tamiya unit is currently unavailable due to the chip shortage, so Tamiya are offering a choice of a Tamiya Hobbywing or Carson Dragster (Tamiya Germany) units. Where a model number is shown (e.g. 20 or 15) that is the motor capacity of the unit - the lower the number, the more powerful a motor you can install later. All work with the motor in the kit.

Battery: The higher the number, the longer the run time.

Charger: Charge time is proportional to the battery you choose. Some examples - for the 1800 battery (others will take longer) - USB charger takes around 4 hours, Mid Speed around 2 to 3 hours, Etronix Fast Charger can be as quick as 60 minutes in the house or 30 minutes in the car and Ansmann Delta also around 30 minutes (and also works in the car).