This is a limited run edition of the standard kit described below but with a pre-painted body, meaning you still need to assemble the chassis and put the stickers on, but the messy painting stage you can skip.

This R/C assembly kit recreates the Citroën DS which made its debut in 1955 and caught people’s attention with its innovative structure and style. Over 1,450,000 were sold up to 1975, and it became one of the better- known cars of the 20th century. This car was used as the official car for the President of France and achieved the overall championship in 1966 global rallies. The version recreated in this assembly kit recreates the early-period model featuring two rounded headlights. The polycarbonate body sits on top of the MB-01 chassis configured in the long wheelbase and front motor / front wheel drive (FF) configuration.

The MB-01 Chassis
The compact, 2WD MB-01 chassis gives a choice of three types of wheelbases, and front- or rear- wheel drive system. This model employs a midship motor, rear-wheel drive setup. Without removing battery pack, motor, and R/C equipment setups from the center frame, simply change attachment directions of final gears and steering linkage to switch between front- and rear-wheel drive; low or high motor position can be chosen for rear-wheel drive cars. The 4-wheel double wishbone suspension features symmetrical structure and friction dampers. Unitized sections such as motor mount, final gears and suspension facilitate ease of assembly and effective maintenance.

• 1/10 scale R/C model assembly kit. Length: 419mm, width: 198mm, height: 137mm. Wheelbase: 239mm (Long wheelbase).
• Polycarbonate body.
• Just like the actual vehicle, the front tread is wider than the rear tread.
• Features 60mm front and rear tires.
• Includes 540-brushed type motor.
• Required to complete: 2-channel radio, steering servo, ESC, 7.2-7.4volt battery with compatible charger.
 
Options Explained

Bearing Upgrade: These make the car run more smoothly and are easily installed during assembly. If there is no option for these shown, then the kit already includes the bearing upgrade as standard. These are entirely optional.

Radio System: There is a choice of a TWIN STICK (Traditional) radio or a Steering Wheel (Modern) radio. Both radios operate on 2.4Ghz and use the new Crystal-Free technology, so you can run multiple cars at the same time without any interference. The steering wheel radio is included in the price, a traditional twin stick radio just a few pounds more.

ESC: This is the connection between the radio system and the motor. You have two choices - the Tamiya Hobbywing unit which will take much more powerful motors, or the Mstyle (from Tamiya Denmark distributor HPI Europe) which will take many upgrades still, is waterproof and a very reliable unit. The Hobbywing unit has a very good reputation with modellers and has a higher capacity allowing faster motors to be used at a later date. Both units feature electronic brakes. Which ESC to choose is purely personal preference as both are equally suitable for this kit.

Battery: The higher the number, the longer the run time. The 1800 battery is included in the price.

Charger: You can choose to upgrade the charger - USB charger takes around 4 hours depending on the battery, Mid Speed around 2 to 3 hours, Etronix Fast Charger can be as quick as 60 minutes in the house or 30 minutes in the car and Ansmann Delta also around 30 minutes (and also works in the car). The basic USB charger is included in the price.

If you would like more options, would like to choose a package without one of the above components, or wish to purchase the car kit on it's own, please search our site for the CUSTOM option of this kit - easily found by searching for the kit name or number followed by CUSTOM.