Debuting in 1984, the RC hornet - the car that produced the boom of 2WD off road cars - has returned in it's original form. Utilizing the light weight design of the original model, this RC assembly kit does not care where it runs - either on road or off road.

Total length 400mm, total height 150mm, width 230mm, built weight 874g.

Made from high grade plastic in all components from the suspension arm to the gear box, bath tub chassis etc and being lightweight, it maximises body rigidity giving a strong model.

Suspension on the front is a swing axle independent system damped by coil springs, the rolling rigid rear axle is supported with oil damper units to absorb heavier bumps. The design keeps sand out of the gearbox and the direct vent system on the gearbox allows air to pass in and out but shuts out the invasion of the small stones which could enter when driving off road. Inside is a differential gear which allows smooth cornering.

Front wheels feature the classic grooved tyre and the rear wheels have superior traction with high grip spiked tyres installed. As for the body, it's polycarbonate which is strong enough to survive light shocks.

Chassis construction - the bumper is made of a special resin. Front suspension is of swing axle independent type supported by friction dampers. Front grooved tyre is hollow. Wheels are 3 piece type with fitted bearings at the front and adjustable via ball adjuster steering tracking position. The ABS resin chassis is of the bathtub type which has high strength as is the side bumper.

Options Explained

Bearing Upgrade: These make the car run more smoothly and are easily installed during assembly. If there is no option for these shown, then the kit already includes the bearing upgrade as standard. These are entirely optional.

Radio System: There is a choice of a TWIN STICK (Traditional) radio or a Steering Wheel (Modern) radio. Both radios operate on 2.4Ghz and use the new Crystal-Free technology, so you can run multiple cars at the same time without any interference. The steering wheel radio is included in the price, a traditional twin stick radio just a few pounds more.

ESC: This is the connection between the radio system and the motor. You have two choices - the Tamiya Hobbywing unit which will take much more powerful motors, or the Carson Dragster (from Tamiya Germany) which will take many upgrades still, is waterproof and a very reliable unit. The Hobbywing unit has a very good reputation with modellers and has a higher capacity allowing faster motors to be used at a later date. Both units feature electronic brakes. The MStyle (Tamiya Denmark) ESC is included in the price, the Tamiya Hobbywing one is just a few pounds more.

Battery: The higher the number, the longer the run time. The 1800 battery is included in the price.

Charger: You can choose to upgrade the charger - USB charger takes around 4 hours depending on the battery, Mid Speed around 2 to 3 hours, Etronix Fast Charger can be as quick as 60 minutes in the house or 30 minutes in the car and Ansmann Delta also around 30 minutes (and also works in the car). The basic USB charger is included in the price.

If you would like more options, would like to choose a package without one of the above components, or wish to purchase the car kit on it's own, please search our site for the CUSTOM option of this kit - easily found by searching for the kit name or number followed by CUSTOM.