A new off-road buggy aimed at the first time builder and racer, the all terrain 2WD Rising Fighter inherits all its great qualities and excellent performance from its predecessors Hornet, Grasshopper, Fighter Buggy and Mad Fighter, using a similar body to the Mad Fighter.

• Length: 418mm, Width: 236mm, Height: 187mm, Wheel base: 268mm, Weight: 1000g.
• Independent swing axles for the front suspension, a rolling rigid rear suspension, and large sized friction dampers effectively absorb shocks and bumps.
• Bevel type diff gear.
• Semi monocoque structure acts as the chassis strengthening part (Screws are used to secure the resin body to the bathtub chassis).
• Fully enclosed gearbox preventing dirt and debris from interfering with operation.
• Powered by a 540 motor (included).
• Grooved front tyres and rear spike tires ensure excellent traction for any surface.
• Stylish resin moulded body.

This model is completely new but made 100% from existing Tamiya parts - meaning good parts availability from the off. The 540 motor coupled with a direct drive gearbox means a good turn of speed for both the beginner and more advanced driver - yet simple construction means ease of assembly and repair. An excellent first time buy with potential for upgrade later on.

Options Explained

Bearing Upgrade: These make the car run more smoothly and are easily installed during assembly. If there is no option for these shown, then the kit already includes the bearing upgrade as standard. These are entirely optional.

Radio System: There is a choice of a TWIN STICK (Traditional) radio or a Steering Wheel (Modern) radios. All operate on 2.4Ghz and use the new Crystal-Free technology, so you can run multiple cars at the same time without any interference. All radios chosen from this page will include a steering servo as these are not included in the kit itself.

ESC: This is the connection between the radio system and the motor. You have several choices. Tamiya no longer make their own ESC, instead they supply from their facilities Hobbywing or Mstyle units. Where a model number is shown (e.g. 20 or 15) that is the motor capacity of the unit - the lower the number, the more powerful a motor you can install later. All work with the motor in the kit.

Battery: The higher the number, the longer the run time.

Charger: Charge time is proportional to the battery you choose. Some examples - for the 1800 battery (others will take longer) - USB charger takes around 4 hours, Mid Speed around 2 to 3 hours, Etronix Fast Charger can be as quick as 60 minutes in the house or 30 minutes in the car and Ansmann Delta also around 30 minutes (and also works in the car).