Tamiya welcomes a re-released and updated version of the 4WD buggy Hotshot II, the original of which was first released in 1987, following Tamiya’s first 4WD buggy Item 58047 Hotshot released in 1985 and Item 58054  Supershot released in 1986.
 
The Hotshot II was a lightweight design thanks to its use of plastic parts.
 
- This is a 1/10 scale R/C model assembly kit. Length: 390mm, width: 235mm, height: 160mm.
-  The shaft-driven 4WD gives speed and stability off road, and through corners.
- The 4-wheel independent double wishbone suspension employs CVA oil dampers (II) (one for front and two for rear) with a front stabilizer to help get the most out of the 4-wheel drive.
- Dynamic body and rear wing are lightweight polycarbonate (0.7mm thick), and use a colour scheme featuring orange lines on a black base. Polycarbonate body is pre-cut and pre-painted in black.
- Gearboxes are sealed to keep out dirt and sand, and contain differentials for smooth cornering.
- Sections such as ABS monocoque frame and suspension arms feature reinforced plastic for high durability.
- Semi-pneumatic oval block / pin spike hybrid tires are paired with large-diameter one-piece nylon wheel.
- Includes updated stickers
- Includes 540 motor

Pricing Note: We have priced this kit above, as we do the whole range, assuming that you will not require the standard ESC unit.  If you would like the kit with the ESC included, simply add the Carson Dragster or Tamiya Hobbywing ESC from the drop down below - which adds £15-£18 to the total.  Note also, Tamiya kits do not come shrink wrapped in the UK or Japan. The box sticker may state "ESC Included" whether you order it with or without this unit.

Options Explained

Bearing Upgrade: These make the car run more smoothly and are easily installed during assembly. If there is no option for these shown, then the kit already includes the bearing upgrade as standard. These are entirely optional.

Radio System: There is a choice of a TWIN STICK (Traditional) radio or a Steering Wheel (Modern) radios. All operate on 2.4Ghz and use the new Crystal-Free technology, so you can run multiple cars at the same time without any interference. All radios chosen from this page will include a steering servo as these are not included in the kit itself.

ESC: This is the connection between the radio system and the motor. You have several choices. The standard Tamiya unit is currently unavailable due to the chip shortage, so Tamiya are offering a choice of a Tamiya Hobbywing or Carson Dragster (Tamiya Germany) units. Where a model number is shown (e.g. 20 or 15) that is the motor capacity of the unit - the lower the number, the more powerful a motor you can install later. All work with the motor in the kit.

Battery: The higher the number, the longer the run time.

Charger: Charge time is proportional to the battery you choose. Some examples - for the 1800 battery (others will take longer) - USB charger takes around 4 hours, Mid Speed around 2 to 3 hours, Etronix Fast Charger can be as quick as 60 minutes in the house or 30 minutes in the car and Ansmann Delta also around 30 minutes (and also works in the car).