The 2WD BT-01 chassis – which offers choices of FF/MR/FR drive system – welcomes another R/C kit; this time, a short wheelbase, midship rear motor / rear wheel drive (MR) setup with the body which recreates the Porsche 911 Carrera RSR 2.8. The Porsche Carrera RS 2.7 is a legend of the Porsche 911 series. Developed to join European GT races in 1973, it employed a 2,687cc horizontally opposed 6-cylinder engine capable of 210hp, a lightweight body with improved aerodynamics, and wide rear tires. The Carrera RSR 2.8 racing version increased displacement to 2,808cc and output to over 300hp; in 1973, it was a European GT race champion and took numerous global victories
 
About the Model
This is a 1/10 scale R/C model assembly kit. Length: 457mm, width: 204mm, height: 138mm.
 
Wheelbase:
251mm. (Short)
 
The form of the Porsche 911 Carrera RSR 2.8 is realistically recreated in lightweight polycarbonate. Silver colour wheels (front: narrow, rear: wide / rims and red wheel caps are separate) are paired with racing slick tires (front: Item 50454, rear: Item 50547). Please note that the kit does not have the inner sponges for either front or rear. A separate moulded plastic part recreates the side mirror.
 
The 2WD BT-01 chassis gives a choice of two types of wheelbase, and front- or rear- wheel drive system. Without removing battery pack, motor and R/C equipment setups from the centre frame, simply change attachment directions of final gears and steering linkage to switch between front- and rear-wheel drive; front (FR) or midship rear (MR) motor position can be chosen for rear-wheel drive cars. The 4-wheel double wishbone suspension features symmetrical structure and friction dampers. Unitized sections such as motor mount, final gears and suspension facilitate ease of assembly and effective maintenance.
 
Pricing Note: We have priced this kit above, as we do the whole range, assuming that you will not require the standard ESC unit.  If you would like the kit with the ESC included, simply add the Carson Dragster or Tamiya Hobbywing ESC from the drop down below - which adds £15-£18 to the total.  Note also, Tamiya kits do not come shrink wrapped in the UK or Japan. The box sticker may state "ESC Included" whether you order it with or without this unit.

Options Explained

Bearing Upgrade: These make the car run more smoothly and are easily installed during assembly. If there is no option for these shown, then the kit already includes the bearing upgrade as standard. These are entirely optional.

Radio System: There is a choice of a TWIN STICK (Traditional) radio or a Steering Wheel (Modern) radios. All operate on 2.4Ghz and use the new Crystal-Free technology, so you can run multiple cars at the same time without any interference. All radios chosen from this page will include a steering servo as these are not included in the kit itself.

ESC: This is the connection between the radio system and the motor. You have several choices. Tamiya no longer make their own ESC, instead they supply from their facilities Hobbywing or Mstyle units. Where a model number is shown (e.g. 20 or 15) that is the motor capacity of the unit - the lower the number, the more powerful a motor you can install later. All work with the motor in the kit.

Battery: The higher the number, the longer the run time.

Charger: Charge time is proportional to the battery you choose. Some examples - for the 1800 battery (others will take longer) - USB charger takes around 4 hours, Mid Speed around 2 to 3 hours, Etronix Fast Charger can be as quick as 60 minutes in the house or 30 minutes in the car and Ansmann Delta also around 30 minutes (and also works in the car).